When using any device, you must pay attention to the correct method of use. Otherwise, if you use the wrong method blindly, the use effect may not be as expected, or the device may fail. When using the flange filter cartridge, whether it is Round flange filter cartridges, gas turbine filter cartridges, or octagonal flange filter cartridges, need to pay special attention to the use of this aspect when using them. Flanged filter cartridges are common filtering equipment. If used incorrectly, the filtering effect may not meet expectations and even affect the quality of the filtering equipment. Here we will share some precautions for using flanged filter cartridges.
Correct flanged cartridge installation
After purchasing a flanged filter cartridge, you need to install the flanged filter cartridge to the corresponding filtering equipment, and here you need to pay attention to the correct installation method. Before installation, it is recommended that you first understand the correct removal and installation procedures of the filtering equipment. Pay attention to the conditions of each checkpoint when installing the flanged filter cartridge. Do not install and remove it violently.
After the installation is complete, be sure to check whether the filter equipment carrying the flanged filter cartridge can operate normally. If there is any poor operation, check the filter equipment and the flanged filter cartridge as soon as possible, and do not force operation.
Focus on flanged cartridge cleaning
When using a flanged filter cartridge, if the Sola gas turbine filter cartridge reaches a saturated state, it is impossible to continue the filtering work. If it is not cleaned in time, on the one hand, the filtering effect cannot be guaranteed, and on the other hand, it will make the filtering The equipment is overloaded for a long time to increase the wear of the filtering equipment.
When cleaning the flanged filter cartridge, one aspect is to seize the time node. When the flanged filter cartridge is about to saturate, clean it. Do not wait until it is saturated before cleaning. On the other hand, when cleaning, Use the correct method, do not use some irritating cleaners. During the drying process, you should also pay attention to the fact that flanged filter cartridges cannot be exposed or dried. These two methods are likely to cause damage to the flanged filter cartridges. Try to place them in a cool and ventilated place to air dry to ensure the method. The blue filter cartridge is not deformed or damaged.